MICROCHIP  MCP4017T-104E/LT  Volatile Digital Potentiometer, 100 kohm, Single, I2C, Linear, ± 20%, 1.8 V

Technical Data Sheet (2.70MB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The MCP4017T-104E/LT is a 7-bit Single I²C™ Digital Potentiometer with volatile memory. The VDD pin is the device's positive power supply input. The input power supply is relative to VSS and can range from 1.8 to 5.5V. A de-coupling capacitor on VDD (to VSS) is recommended to achieve maximum performance. While the device's voltage is in the range of 1.8V <= VDD &lt; 2.7V. It is intended to be used in applications where a programmable resistance with moderate bandwidth is desired.
  • Potentiometer or rheostat configuration
  • 7-bit resistor network resolution - 127 resistors (128 steps)
  • Zero to full scale wiper operation
  • RAB resistances
  • 100R Typical low wiper resistance
  • 50ppm Typical (0 to 70°C) absolute (rheostat) low tempco
  • Simple I²C™compatible protocol with read and write commands
  • 1.5V Typical brown-out reset protection
ESD sensitive device, take proper precaution while handling the device.


Product Information

Automotive Qualification Standard:
Control Interface:
End To End Resistance:
100 kohm
MSL 1 - Unlimited
No. of Pins:
6 Pins
No. of Pots:
No. of Steps:
Operating Temperature Max:
125 °C
Operating Temperature Min:
-40 °C
Cut Tape
Potentiometer IC Case Style:
Product Range:
Single 128-Tap Volatile Digital Pots
Resistance Tolerance:
± 20%
No SVHC (17-Dec-2015)
Supply Voltage Max:
5.5 V
Supply Voltage Min:
1.8 V
Temperature Coefficient:
Track Taper:

Find similar products  grouped by common attribute


  • Metering;
  • Automotive

Legislation and Environmental

Moisture Sensitivity Level:
MSL 1 - Unlimited
Country of Origin:
United States

Country in which last significant manufacturing process was carried out

RoHS Compliant:
Tariff No:
Weight (kg):

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

  • Operating Temperature Min: -40°C
  • No. of Steps: 128
  • Operating Temperature Max: 125°C
  • Control Interface: I2C
  • No. of Pins: 6Pins
  • Resistance Tolerance: ± 20%
  • No. of Pots: Single
  • Product Range: Single 128-Tap Volatile Digital Pots
  • Automotive Qualification Standard: AEC-Q100
  • Track Taper: Linear
  • End To End Resistance: 100kohm
  • Temperature Coefficient: 50ppm/°C
  • Supply Voltage Min: 1.8V
  • Packaging: Cut Tape
  • Supply Voltage Max: 5.5V
  • Potentiometer IC Case Style: SC-70