Low

MCP7940M-I/P - 

RTC, I2C, 64BYTES SRAM, 8PDIP

Image is for illustrative purposes only. Please refer to product description.

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
MCP7940M-I/P
Order Code:
2098894
Product Range
AEC-Q100
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-40°C
:
RTC
:
85°C
:
8Pins
:
-
:
AEC-Q100
:
1.8V
:
DIP
:
I2C
:
HH:MM:SS
:
Each
:
5.5V
:
DD:MM:YYYY
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The MCP7940M-I/P is an I²C™ Real-time Clock/Calendar (RTCC) tracks time using internal counters for hours, minutes, seconds, days, months, years and day of week. Alarms can be configured on all counters up to and including months. For usage and configuration, the MCP7940M supports I²C communications up to 400kHz. The open-drain, multi-functional output can be configured to assert on an alarm match, to output a selectable frequency square wave or as a general purpose output. The MCP7940M is designed to operate using a 32.768kHz tuning fork crystal with external crystal load capacitors. On-chip digital trimming can be used to adjust for frequency variance caused by crystal tolerance and temperature.
  • On-chip digital trimming/calibration - ±1PPM resolution, ±129PPM range
  • Dual programmable alarms
  • Versatile output pin - Clock output with selectable frequency
  • 1.2µA at 3.3V Operating from VCC, low typical timekeeping current
  • 64-byte SRAM User memory
  • 2-wire serial interface, I²C™ compatible

Applications

Industrial, Clock & Timing, Industrial, Automotive

Warnings

ESD sensitive device, take proper precaution while handling the device.