
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | AD5142BCPZ100-RL7Copy |
| Manufacturer Standard Lead Time | 37 weeks |
| Order Code | Cut Tape4296688 Cut Tape4296688RL |
| Product Range | Dual 256-Tap Non-volatile Digital Pots |
| Your Part Number | |
| Technical Datasheet |
Notify me when back in stock
| Quantity | Price (inc GST) |
|---|---|
| 1+ | S$10.230 (S$11.1507) |
| 10+ | S$7.860 (S$8.5674) |
| 25+ | S$7.260 (S$7.9134) |
| 100+ | S$6.620 (S$7.2158) |
| 250+ | S$6.390 (S$6.9651) |
| 500+ | S$6.270 (S$6.8343) |
Product Information
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | AD5142BCPZ100-RL7Copy |
| Manufacturer Standard Lead Time | 37 weeks |
| Order Code | Cut Tape4296688 Cut Tape4296688RL |
| Product Range | Dual 256-Tap Non-volatile Digital Pots |
| Technical Datasheet | |
| Potentiometer Type | Non Volatile |
| End To End Resistance | 100kohm |
| No. of Pots | Dual |
| Control Interface | SPI |
| Track Taper | Logarithmic |
| Supply Voltage Min | 2.3V |
| Resistance Tolerance | ± 8% |
| Supply Voltage Max | 5.5V |
| IC Case / Package | LFCSP-EP |
| No. of Pins | 16Pins |
| IC Mounting | Surface Mount |
| Potentiometer IC Case Style | LFCSP |
| No. of Steps | 256 |
| Temperature Coefficient | ± 35ppm/°C |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 125°C |
| Product Range | Dual 256-Tap Non-volatile Digital Pots |
| Qualification | - |
| SVHC | No SVHC (04-Feb-2026) |
Product Overview
AD5142BCPZ100-RL7 is a dual channel, 256-position, SPI, non-volatile digital potentiometer. The low resistor tolerance and low nominal temperature coefficient simplify open-loop applications as well as applications requiring tolerance matching. The linear gain setting mode allows independent programming of the resistance between the digital potentiometer terminals through the RAW and RWB string resistors, allowing accurate resistor matching. The high bandwidth and low total harmonic distortion (THD) ensure optimal performance for AC signals, making this device suitable for filter design. The wiper values can be set through an SPI-compatible digital interface that also reads back the wiper register and EEPROM contents. It is used in applications such as portable electronics level adjustment, LCD panel brightness and contrast controls, programmable filters, delays, and time constants, and programmable power supplies.
- RAB is 100Kohm, linear gain setting mode, logic supply voltage range from 1.8V to 5.5V
- Resistor integral nonlinearity is ±0.1LSB typ at (VDD ≥ 2.7V, VDD = 2.3V to 5.5V, VSS = 0V)
- Resistor differential nonlinearity is ±0.2LSB typ at (VDD = 2.3V to 5.5V, VSS = 0V)
- Resistance temperature coefficient is 35ppm/°C typ at (VDD = 2.3V to 5.5V, VSS = 0V)
- Bandwidth is 0.43MHz typ at (RAB = 100Kohm, VDD = 2.3V to 5.5V, VSS = 0V; VDD = 2.25V to 2.75V)
- Resistor noise density is 20nV/√Hz typ at (VDD = 2.3V to 5.5V, VSS = 0V; VDD = 2.25V to 2.75V)
- VW settling time is 12µs typical at (RAB = 100Kohm, VDD = 2.3V to 5.5V, VSS = 0V)
- Power dissipation is 3.5µW typ at (VIH = VLOGIC or VIL = GND, -40°C <lt/> TA <lt/> +125°C)
- Total harmonic distortion is -90dB typ at (RAB = 100Kohm, VDD = 2.3V to 5.5V, VSS = 0V)
- Operating temperature range from -40°C to +125°C, 16-lead LFCSP-WQ package
Notes
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technical Specifications
| Potentiometer Type | Non Volatile |
|---|---|
| No. of Pots | Dual |
| Track Taper | Logarithmic |
| Resistance Tolerance | ± 8% |
| IC Case / Package | LFCSP-EP |
| IC Mounting | Surface Mount |
| No. of Steps | 256 |
| Operating Temperature Min | -40°C |
| Product Range | Dual 256-Tap Non-volatile Digital Pots |
| SVHC | No SVHC (04-Feb-2026) |
| End To End Resistance | 100kohm |
|---|---|
| Control Interface | SPI |
| Supply Voltage Min | 2.3V |
| Supply Voltage Max | 5.5V |
| No. of Pins | 16Pins |
| Potentiometer IC Case Style | LFCSP |
| Temperature Coefficient | ± 35ppm/°C |
| Operating Temperature Max | 125°C |
| Qualification | - |
Technical Docs (1)
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Ireland Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .00001 |
