
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | DS24B33S+T&RCopy |
| Manufacturer Standard Lead Time | 44 weeks |
| Order Code | Re-Reel2514603RL Cut Tape2514603 |
| Product Range | 4Kbit 1 Wire Serial EEPROM |
| Your Part Number | |
| Technical Datasheet |
2,000 more incoming. You can reserve stock now
| Packaging Type | Quantity | Unit Price (excl GST): | Total |
|---|---|---|---|
| Cut Tape | 1 | S$8.070 | S$8.07 |
| Quantity | Price (inc GST) |
|---|---|
| 1+ | S$8.070 (S$8.7963) |
| 10+ | S$7.520 (S$8.1968) |
| 25+ | S$7.290 (S$7.9461) |
| 100+ | S$6.960 (S$7.5864) |
| 250+ | S$6.740 (S$7.3466) |
| 500+ | S$6.560 (S$7.1504) |
Product Information
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | DS24B33S+T&RCopy |
| Manufacturer Standard Lead Time | 44 weeks |
| Order Code | Re-Reel2514603RL Cut Tape2514603 |
| Product Range | 4Kbit 1 Wire Serial EEPROM |
| Technical Datasheet | |
| Memory Density | 4Kbit |
| Memory Configuration | 16 x 256bit |
| Interfaces | 1-Wire |
| Clock Frequency Max | - |
| IC Case / Package | WSOIC |
| No. of Pins | 8Pins |
| Supply Voltage Min | 2.8V |
| Supply Voltage Max | 5.25V |
| IC Mounting | Surface Mount |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| Product Range | 4Kbit 1 Wire Serial EEPROM |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (04-Feb-2026) |
Product Overview
The DS24B33S+T&R is a 1-wire 4KB EEPROM in 8 pin WSOIC package. This 4096bit non-volatile EEPROM is organized as 16 memory pages of 256bits each. Data is written to a 32byte scratchpad, verified and then copied to the EEPROM memory. The DS24B33 communicates over a single conductor 1-wire bus. The communication follows the standard 1-wire protocol. Each device has its own unalterable and unique 64bit registration number that is factory programmed into the chip ensures error free device selection and absolute part identity. The registration number is used to address the device in a multidrop 1-wire net environment. The DS24B33 is software compatible to DS2433 device.
- Supply voltage range from 2.8V to 5.25V
- Operating temperature range from -40°C to 85°C
- Read and write access is highly backward compatible to DS2433 device
- 256bit scratchpad with strict read/write protocols ensures integrity of data transfer
- Switchpoint hysteresis to optimize performance in the presence of noise
- Communicates to host at 15.4Kbps or 125Kbps using 1-wire protocol
- Low cost surface mount package
- IEC 1000-4-2 level 4 ESD protection (±8KV contact, ±15KV air, typical) for IO pin
- Recovery time is 5μs (standard speed) and 2μs (overdrive speed)
- Board Identification; Medical Sensor Calibration Data Storage; Smart Cables; Storage of Calibration Constants; Storage of Product Revision Status
Applications
Embedded Design & Development
Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Notes
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technical Specifications
| Memory Density | 4Kbit |
|---|---|
| Interfaces | 1-Wire |
| IC Case / Package | WSOIC |
| Supply Voltage Min | 2.8V |
| IC Mounting | Surface Mount |
| Operating Temperature Max | 85°C |
| MSL | MSL 1 - Unlimited |
| Memory Configuration | 16 x 256bit |
|---|---|
| Clock Frequency Max | - |
| No. of Pins | 8Pins |
| Supply Voltage Max | 5.25V |
| Operating Temperature Min | -40°C |
| Product Range | 4Kbit 1 Wire Serial EEPROM |
| SVHC | No SVHC (04-Feb-2026) |
Technical Docs (2)
Alternatives for DS24B33S+T&R
1 Product Found
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Thailand Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85423275 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .000212 |
