MAX17531AUBEVKIT#

MAX17531AUBEVKIT# is a MAX17531 5V evaluation kit (EV kit) (µMAX). This is a fully assembled and tested circuit board that demonstrates the performance of the MAX17531 42V, 50mA ultra-small, high-efficiency, synchronous step-down DC-DC converter in a 10-pin µMAX package. The EV kit operates over a wide input voltage range of 6V to 42V and provides up to 50mA load current at 5V output. It draws only 26µA supply current under no-load conditions (EN/UVLO connected to VIN). The EV kit is programmed to switch at a frequency of 300kHz. The device is simple to use and easily configurable with minimal external components. It features cycle-by-cycle peak current-limit protection, undervoltage lockout and thermal shutdown. The EV kit comes installed with the MAX17531AUB+ in a 10-pin (3mm x 3mm) µMAX package.

• Internal or programmable soft-start
• PFM or forced-PWM mode of operation
• Open-drain (active low) RESET output
• Peak current-limit protection
• Thermal shutdown
• Proven PCB layout
• Fully assembled and tested

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party