MAX17579EVKIT#

MAX17579EVKIT# is an evaluation kit (EV kit) that provides a proven design to evaluate the MAX17579 high-efficiency, high-voltage, inverting, Himalaya synchronous DC-DC converter. The MAX17579EVKIT# EV kit generates -15V output (VOUT1) at load currents up to 240mA from a 16V to 45V input supply and operates at 600kHz (fSW1) switching frequency. This EV kit configuration features MAX17579 that operates in continuous conduction mode (CCM) at all loads, thus, providing a constant frequency operation. The EV kits are configured for optimum efficiency and component size. The EV kit features programmable enable and input undervoltage-lockout (UVLO), soft start, open-drain (active low)RESET signal and external clock synchronization. Suitable for gate-drive circuits, general purpose point-of-load, high-voltage, single-board system, industrial control power supply, motion control, wall-transformer regulation applications.

• VOUT1 = -15V, IOUT1 = 240mA, VIN1 range = 16V to 45V
• Enable/UVLO input, resistor programmable UVLO threshold
• Adjustable soft-start time
• RESET (active low) output with a pullup resistor to an external supply
• System ground interfaced EN/UVLO and (active low)RESET Pins
• Overcurrent and overtemperature protection
• Proven PCB layout
• Fully assembled and tested
• Complies with CISPR22(EN55022) Class B conducted and radiated emissions

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party