MAX17633AEVKIT#

MAX17633AEVKIT# is a 3.3V output evaluation kit that provides a proven design to evaluate the MAX17633A high-voltage, high-efficiency synchronous step-down DC-DC converter. The EV kit is preset for 3.3V output at 3.5A load current and operates at 500kHz switching frequency. The EV kit features an adjustable input undervoltage lockout, adjustable soft-start, open-drain (active low) RESET signal, and external frequency synchronization.

• Wide 4.5V to 36V input range
• Programmed 3.3V output at 3.5A load current
• EN/UVLO input with resistor-programmable UVLO threshold
• Programmed 1ms soft-start time
• Selectable PWM, PFM and DCM modes
• Open-drain (active low) RESET output pulled up to INTVCC
• Provision for external frequency synchronization
• Overcurrent and overtemperature protection
• Fully assembled and tested

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party