MAX77958EVKIT-2S3#

MAX77958EVKIT-2S3# is a MAX77958 evaluation kit (EV kit) which is a fully assembled and tested printed circuit board (PCB) that demonstrates the MAX77958 standalone USB Type-C and power delivery controller. The EV kit enables easy evaluation of the following features such as USB Type-C Detection/PD communication (power role (Sink and Source), data role (UFP and DFP) detection, PD adapter detection and PD communication, integrated VCONN switch with OCP, power/data role swap, PPS (with PD adapter supporting PPS), audio and debug accessory sink/source mode, vendor defined message), BC1.2 legacy charger detection: SDP, CDP, DCP and DCD timeout, I2C host to control companion IC and 9 configurable GPIOs. The EV kit contains a MAX77962 charger to demonstrate the I2C host feature of the MAX77958. The MAX77962 is a buck-boost charger for 2S Li+ battery application and is capable of 3.5V to 23V input voltage, with a maximum programmable fast charging current of 3.2A.

• High voltage VBUS range, short to VBUS protection on CC pins
• Support BC1.2 Legacy/proprietary charger detection (integrated D+/D- switches)
• MTP memory for storing custom configuration, moisture detection and corrosion prevention
• Customization script, I2C programmable configuration, on-board I2C interface
• 9 configurable GPIOs (GPIO6 for SID): external SuperSpeed Mux/Detection/IRQ
• EN/DISABLE external power or FETs
• On-board I2C interface
• Windows 10 compatible
• Proven PCB layout
• Fully assembled and tested

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party