MAXM17537EVKIT#

MAXM17537EVKIT# is a 15V-output evaluation kit (EV kit) is a demonstration circuit of the MAXM17537 60V, 3A high-efficiency, current-mode, synchronous step-down DC-DC switching power module. The EV kit operates over a wide input-voltage of 19V to 60V and provides up to 3A load current with a 15V-output voltage. The EV kit is programmed to switch at a frequency of 700kHz. The module is simple to use and easily configurable with minimal external components. It features cycle-by-cycle peak current-limit protection, undervoltage lockout (EN/UVLO), and thermal shutdown. The EV kit includes the compact, 29-pin, 15mm x 9mm x 4.32mm SiP package MAXM17537 module installed and is rated to operate over the full industrial -40°C to 125°C temperature range.

• Highly integrated solution with built-in shielded inductor
• MAXM17537 offers high 95.6% efficiency (VIN = 24V, VOUT = 15V, IOUT = 2A)
• All ceramic capacitors and ultra-compact solution
• Selectable PWM, DCM, and PFM modes
• Programmable 4ms soft-start time and prebias startup
• Open-drain (active low)RESET output pulled up to 5V VCC
• Programmable EN/UVLO threshold and provision for external frequency synchronization
• Hiccup overcurrent protection (OCP), overtemperature protection (OTP)
• Industrial temperature range from -40°C to +125°C
• Complies with CISPR22(EN55022) Class B conducted and radiated emissions

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party