MAX3442EEPA+

MAX3442EEPA+ is a fault-protected RS-485 transceiver that features ±60V protection from signal faults on communication bus lines. It contains one differential line driver with three-state output and one differential line receiver with three-state input. The 1/4-unit load receiver input impedance allows up to 128 transceivers on a single bus. The device operates from a 5V supply at data rates of up to 10Mbps. True fail-safe inputs guarantee a logic-high receiver output when the receiver inputs are open, shorted, or connected to an idle data line. Hot-swap circuitry eliminates false transitions on data bus during circuit initialization or connection to a live backplane. Short-circuit current-limiting and thermal shutdown circuitry protect the driver against excessive power dissipation and on-chip ±15kV ESD protection eliminates costly external protection devices. Applications include RS-422/RS-485 communications, industrial networks, telecommunications systems, and HV AC controls.

• Hot swappable for telecom applications, true fail-safe receiver inputs
• Allow up to 128 transceivers on the bus
• Industry-standard pinout
• Common-mode input range from -7V to +12V
• 0.25Mbps data rate
• Low power shutdown, receiver/driver enable
• Receiver output short-circuit current is ±95mA max at 0V ≤ VRO ≤ VCC
• Receiver input resistance is 48kohm min at -7V ≤ VCM ≤ +12V
• 8 PDIP package
• Temperature range from -40°C to +85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party