
| Manufacturer | MICRON |
|---|---|
| Manufacturer Part No | MT29F2G08ABAEAWP-IT:ECopy |
| Manufacturer Standard Lead Time | 52 weeks |
| Order Code | 3577560 |
| Product Range | 3.3V Parallel NAND Flash Memories |
| Your Part Number |
4,800 more incoming. You can reserve stock now
| Quantity | Price (inc GST) |
|---|---|
| 1+ | S$32.400 (S$35.316) |
Product Information
| Manufacturer | MICRON |
|---|---|
| Manufacturer Part No | MT29F2G08ABAEAWP-IT:ECopy |
| Manufacturer Standard Lead Time | 52 weeks |
| Order Code | 3577560 |
| Product Range | 3.3V Parallel NAND Flash Memories |
| Flash Memory Type | SLC NAND |
| Memory Density | 2Gbit |
| Memory Configuration | 256M x 8bit |
| Interfaces | Parallel |
| IC Case / Package | TSOP |
| No. of Pins | 48Pins |
| Clock Frequency Max | 50MHz |
| Access Time | 16ns |
| Supply Voltage Min | 2.7V |
| Supply Voltage Max | 3.6V |
| Supply Voltage Nom | 3.3V |
| IC Mounting | Surface Mount |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| Product Range | 3.3V Parallel NAND Flash Memories |
| MSL | MSL 3 - 168 hours |
| SVHC | No SVHC (17-Dec-2015) |
Product Overview
MT29F2G08ABAEAWP-IT:E is a NAND flash memory. It includes an asynchronous data interface for high-performance I/O operations. This device uses a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection and monitor device status (R/B#). This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign. A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND Flash die. A NAND Flash die is the minimum unit that can independently execute commands and report status. A NAND Flash die, in the ONFI specification, is referred to as a logical unit (LUN). There is at least one NAND Flash die per chip enable signal.
- Open NAND flash interface (ONFI) 1.0-compliant, single-level cell (SLC) technology
- Ready/Busy# (R/B#) signal provides a hardware method of detecting operation completion
- WP# signal: write protect entire device
- Block 0 requires 1-bit ECC if PROGRAM/ERASE cycles are less than 1000
- RESET (FFh) required as first command after power-on
- Internal data move operations supported within the plane from which data is read
- Data retention: 10 years, endurance: 100,000 PROGRAM/ERASE cycles
- 2Gb density
- 3.3V (2.7–3.6V) operating voltage range
- 48-pin TSOP package, -40°C to +85°C industrial operating temperature range
Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Technical Specifications
| Flash Memory Type | SLC NAND |
|---|---|
| Memory Configuration | 256M x 8bit |
| IC Case / Package | TSOP |
| Clock Frequency Max | 50MHz |
| Supply Voltage Min | 2.7V |
| Supply Voltage Nom | 3.3V |
| Operating Temperature Min | -40°C |
| Product Range | 3.3V Parallel NAND Flash Memories |
| SVHC | No SVHC (17-Dec-2015) |
| Memory Density | 2Gbit |
|---|---|
| Interfaces | Parallel |
| No. of Pins | 48Pins |
| Access Time | 16ns |
| Supply Voltage Max | 3.6V |
| IC Mounting | Surface Mount |
| Operating Temperature Max | 85°C |
| MSL | MSL 3 - 168 hours |
Technical Docs (1)
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Singapore Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85423269 |
| US ECCN: | 3A991.b.1.a |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (17-Dec-2015) |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .02268 |
