LD1117DT12CTR
Fixed LDO Voltage Regulator, up to 15V, 1.1V drop, 1.2V/950mA out, TO-252-3
10,000 more incoming. You can reserve stock now
| Packaging Type | Quantity | Unit Price (excl GST): | Total |
|---|---|---|---|
| Cut Tape | 5 | S$0.851 | S$4.26 |
| Quantity | Price (inc GST) |
|---|---|
| 5+ | S$0.851 (S$0.9276) |
| 10+ | S$0.580 (S$0.6322) |
| 100+ | S$0.485 (S$0.5286) |
| 500+ | S$0.463 (S$0.5047) |
| 1000+ | S$0.436 (S$0.4752) |
| 5000+ | S$0.428 (S$0.4665) |
| 10000+ | S$0.419 (S$0.4567) |
Product Information
Product Overview
LD1117DT12CTR is a fixed low-drop positive voltage regulator. High efficiency is assured by the NPN pass transistor. In fact, in this case, unlike than PNP one, the quiescent current flows mostly into the load. Only a very common 10µF minimum capacitor is needed for stability. On-chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1 % at 25°C.
- Internal current and thermal limit
- Low dropout voltage of 1V typical at IO = 100mA
- 2.85V device performances are suitable for SCSI-2 active termination
- Output current is 950mA typical (Vin - VO = 5 V, TJ = 25°C)
- Output voltage is 1.2V
- Operating input voltage is 15V maximum
- 2mA minimum load current at Vin = 15V
- 0.003% output noise (%VO) at B = 10Hz to 10KHz, TJ = 25°C
- Supply voltage rejection is 75dB typ (IO=40mA, f=120Hz, TJ=25°C, Vin - VO=3V, Vripple=1 VPP)
- DPAK package
Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Technical Specifications
Fixed
15V
1.2V
-
Positive Output
800mA
1.1V
TO-252 (DPAK)
-40°C
1.2V 950mA LDO Voltage Regulators
No SVHC (25-Jun-2025)
-
1Outputs
1.2V
-
800mA
1.1V
Surface Mount
3Pins
125°C
MSL 1 - Unlimited
Technical Docs (2)
Legislation and Environmental
Country in which last significant manufacturing process was carried outCountry of Origin:Singapore
Country in which last significant manufacturing process was carried out
RoHS
RoHS
Product Compliance Certificate