SN74ABT244APWR

The SN74ABT244APWR is an octal Buffer and Line Driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. This device provides the choice of selected combinations of inverting and non-inverting outputs, symmetrical active-low output-enable (OE)\ inputs and complementary OE and OE\ inputs. The SN74ABT244A is organized as two 4-bit buffer/line drivers with separate OE\ inputs. When OE\ is low, the devices pass non-inverted data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN74ABT244A is characterized for operation from -40 to 85°C.

• State-of-the-Art EPIC-IIB™ BiCMOS design significantly reduces power dissipation
• High-drive outputs
• Latch-up performance exceeds 500mA per JEDEC standard JESD-17
• Typical VOLP (output ground bounce) <lt/>1V at VCC = 5V, TA = 25°C
• Green product and no Sb/Br

Applications

Industrial, Automation & Process Control, Signal Processing, Clock & Timing