SN74ALVC164245DGGR
Transceiver, 74ALVC16245, 2.3 V to 3.6 V, TSSOP-48
Notify me when back in stock
| Packaging Type | Quantity | Unit Price (excl GST): | Total |
|---|---|---|---|
| Cut Tape | 1 | S$5.410 | S$5.41 |
| Quantity | Price (inc GST) |
|---|---|
| 1+ | S$5.410 (S$5.8969) |
| 10+ | S$4.070 (S$4.4363) |
| 25+ | S$3.730 (S$4.0657) |
| 50+ | S$3.260 (S$3.5534) |
| 100+ | S$2.790 (S$3.0411) |
| 250+ | S$2.740 (S$2.9866) |
| 500+ | S$2.680 (S$2.9212) |
| 1000+ | S$2.630 (S$2.8667) |
Product Information
Product Overview
The SN74ALVC164245DGGR is a 16-bit non-inverting 2.5 to 3.3 or 3.3 to 5V level shifting Bus Transceiver with three-state outputs. The SN74ALVC164245 is designed for asynchronous communication between data buses. The control circuitry is powered by VCCA. To ensure the high-impedance state during power up or power down, the output-enable (OE) or input should be tied to VCC through a pull up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver. The logic levels of the direction-control (DIR) input and the output-enable (OE) or input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A-bus to the B-bus when the B-port outputs are activated and from the B-bus to the A-bus when the A-port outputs are activated.
- Maximum TPD of 5.8ns at 3.3V
- ±24mA Output drive at 3.3V
- Control inputs VIH/VIL levels are referenced to VCCA voltage
- Latch-up performance exceeds 250mA per JESD 17
- Green product and no Sb/Br
Applications
Industrial
Technical Specifications
Transceiver, Non Inverting
TSSOP
48Pins
3.6V
7416245
85°C
-
74ALVC16245
TSSOP
2.3V
74ALVC
-40°C
-
MSL 1 - Unlimited
Legislation and Environmental
Country in which last significant manufacturing process was carried outCountry of Origin:Malaysia
Country in which last significant manufacturing process was carried out
RoHS
RoHS
Product Compliance Certificate