TS321IDBVR

The TS321IDBVR is a Low-power Single Operational Amplifier for cost-sensitive applications in which space savings are important. This bipolar op amp can handle a single supply between 3 and 30V or a dual-supply between ±1.5 and ±15V. The TS321 has a gain bandwidth of 0.8MHz and 0.4V/μs slew rate. Operational amplifiers have reduced phase margin when there is a direct capacitance on the output. The stability is affected most when the amplifier is set to unity gain. Small signal response to a step input of 100mV reveals the loop stability with a range of capacitors. It is useful in a wide range of signal conditioning applications. Inputs can be powered before VCC for flexibility in multiple supply circuits.

• Wide power-supply range
• Single supply from 3 to 30V
• Dual supply from ±1.5 to ±15V
• Large output voltage swing from 0 to 3.5V (minimum, VCC = 5V)
• Low supply current at 500µA (typical)
• Low input bias current at 20nA (typical)
• Stable with high capacitive loads
• Green product and no Sb/Br

Applications

Computers & Computer Peripherals, HVAC, Portable Devices, Multimedia, Consumer Electronics

Warnings

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Notes

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.