AD9201ARSZRL

AD9201ARSZRL is a complete dual channel, 20MSPS, 10bit CMOS ADC. It is optimized specifically for applications where close matching between two ADCs is required (e.g., I/Q channels in communications applications). The 20MHz sampling rate and wide input bandwidth will cover both narrowband and spread-spectrum channels. The AD9201 integrates two 10bit, 20MSPS ADCs, two input buffer amplifiers, an internal voltage reference, and multiplexed digital output buffers. Each ADC incorporates a simultaneous sampling sample-and-hold amplifier at its input. The analogue inputs are buffered; no external input buffer op-amp will be required in most applications. The ADCs are implemented using a multistage pipeline architecture that offers accurate performance and guarantees no missing codes. The outputs of the ADCs are ported to a multiplexed digital output buffer.

• Complete dual matching ADCs, single supply voltage range from 2.7V to 5.5V
• On-chip analogue input buffers, on-chip reference
• Over nine effective bits, no missing codes guaranteed
• Differential nonlinearity is ±0.4LSB typical at (AVDD = +3V, DVDD = +3V)
• Integral nonlinearity is 1.2LSB typical at (AVDD = +3V, DVDD = +3V)
• Supply current is 71.6mA typical at (AVDD = 3V, DVDD = +3V)
• Differential phase is 0.1° typical at (NTSC 40 IRE mod ramp, AVDD = +3V, DVDD = +3V)
• Differential gain is 0.05% typical at (FS = 14.3MHz, AVDD = +3V, DVDD = +3V)
• Full power bandwidth (0dB) is 245MHz typical at (AVDD = +3V, DVDD = +3V)
• Operating temperature range from -40°C to +85°C, 28-lead SSOP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party