ADG658TRUZ-EP

ADG658TRUZ-EP is a low voltage, CMOS analogue multiplexer comprised of eight single channels. The ADG658-EP switches one of eight inputs (S1 to S8) to a common output, D, as determined by the 3-bit binary address lines A0, A1, and A2. An EN input enables or disables the device. When disabled, all channels are switched off. The ADG658-EP is designed on an enhanced process that provides lower power dissipation yet gives high switching speeds. It can operate equally well as either a multiplexer or a demultiplexer, and has an input range that extends to the supplies. All channels exhibit break-before-make switching action, preventing momentary shorting when switching channel. It is used in applications such as automatic test equipment, data acquisition systems, battery-powered systems, communication systems, audio and video signal routing, relay replacement, sample-and-hold systems, industrial control systems.

• Dual supply range from ±2V to ±6V, single supply range from 2V to 12V
• Rail-to-rail switching operation, single, 8 to 1 multiplexer
• 0.01μA typical supply current, TTL/CMOS compatible inputs
• Controlled manufacturing baseline, one assembly/test site
• One fabrication site, enhanced product change notification
• On resistance is 45 ohm typical at (+25°C)
• On resistance flatness is 10 ohm typ at (VDD = +5V, VSS = -5V, +25°C)
• Transition time is 80ns typical at (+25°C)
• 210MHz typical -3dB bandwidth at (RL = 50 ohm, CL = 5pF, +25°C)
• Temperature range from -55°C to +125°C, 16-lead TSSOP

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party