ADL5350ACPZ-R7

ADL5350 is a high linearity, up-and-down converting mixer capable of operating over a broad input frequency range. It is well suited for demanding cellular base station mixer designs that require high sensitivity and effective blocker immunity. Based on a GaAs pHEMT, single-ended mixer architecture, this device provides excellent input linearity and a low noise figure without the need for a high power level LO drive. The high input linearity of the device makes the device an excellent mixer for communications systems that require high blocker immunity, such as GSM 850MHz/900MHz and 800MHz CDMA2000. At 2GHz, a slightly greater supply current is required to obtain similar performance. The single-ended broadband RF/IF port allows the device to be customized for a desired band of operation using simple external filter networks. It is used in application such as cellular base stations, point-to-point radio links, RF instrumentation etc.

• Broadband radio frequency (RF), intermediate frequency (IF), and local oscillator (LO) ports
• Conversion loss is 6.8dB typ at (fRF = 1950MHz, fLO = 1760MHz, fIF = 190MHz)
• SSB noise figure is 6.5dB typ at (fRF = 1950MHz, fLO = 1760MHz, fIF = 190MHz)
• Input third-order intercept is 25dBm typ at (fRF1 = 849MHz, fRF2 = 850MHz)
• Input 1dB compression point is 19.8dBm typ at (fRF = 820MHz, fLO = 750MHz, fIF = 70MHz)
• Low LO drive level, single-ended design: no need for baluns
• Single-supply operation is 3V
• Supply current is 16.5mA typ at (LO power = 4dBm)
• Operating temperature is -40°C to +85°C
• Package style is 8-lead lead frame chip scale [LFCSP]

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party