DAC8562FPZ

DAC8562FPZ is a complete, parallel input, 12bit, voltage output DAC designed to operate from a single +5V supply. Built using a CBCMOS process, this monolithic DAC offers the user low cost, and ease of use in +5V only systems. It is coded straight binary. The op-amp output swings from 0V to +4.095V for a one millivolt per bit resolution, and is capable of driving ±5mA. Built using low-temperature-coefficient silicon-chrome thin-film resistors, excellent linearity error over temperature has been achieved as shown below in the linearity error versus digital input code plot. The digital interface is parallel and high-speed to interface to the fastest processors without wait states. The interface is very simple requiring only a single active-low CE signal. An asynchronous active-low CLR input sets the output to zero scale. It is used in applications such as digitally controlled calibration, servo controls, process control equipment, and PC peripherals.

• Complete 12bit DAC, no external components, single +5V operation
• Differential nonlinearity is +1LSB maximum at (-40°C ≤ TA ≤ +85°C)
• Full-scale tempco is ±16ppm/°C typical at (-40°C ≤ TA ≤ +85°C)
• Power dissipation is 15mW typical at (VIH = 2.4V, VIL = 0.8V)
• Input capacitance is 10pF maximum at (-40°C ≤ TA ≤ +85°C)
• Input leakage current is 10µA maximum at (-40°C ≤ TA ≤ +85°C)
• Load regulation is 0.1%/mA maximum at (IREF = 0 to 5mA)
• Output current is ±7mA typical at (-40°C ≤ TA ≤ +85°C)
• Operating temperature range from -40°C to +85°C
• 20-pin P-DIP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party