LTC2364CMS-16#PBF

LTC2364CMS-16#PBF is a low-noise, low-power, high-speed 16bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2364-16 has a 0V to VREF pseudo-differential unipolar input range with VREF ranging from 2.5V to 5.1V. The LTC2364-16 consumes only 3.4mW and achieves ±0.75LSB INL maximum, with no missing codes at 16 bits with 94.7dB SNR. The LTC2364-16 has a high-speed SPI-compatible serial interface that supports 1.8V, 2.5V, 3.3V, and 5V logic while also featuring a daisy-chain mode. The fast 250ksps throughput with no cycle latency makes the device ideally suited for a wide variety of high-speed applications. An internal oscillator sets the conversion time, easing external timing considerations. Applications include medical imaging, high-speed data acquisition, portable or compact instrumentation, industrial process control, low-power battery-operated instrumentation, and ATE.

• Pseudo-differential unipolar input range from 0V to VREF
• VREF input voltage range from 2.5V to 5.1V, no pipeline delay, no cycle latency
• 1.8V to 5V I/O voltages, SPI-compatible serial I/O with daisy-chain mode
• Internal conversion clock, integral linearity error is ±0.1LSB typical at (TA = 25°C)
• Full-scale error is ±2LSB typical at (TA = 25°C)
• Signal-to-(noise + distortion) ratio is 94.7dB typical at (fIN = 2KHz, VREF = 5V)
• 34MHz typical -3dB input bandwidth at (TA = 25°C and AIN = -1dBFS)
• Aperture jitter is 4ps typical at (TA = 25°C and AIN = -1dBFS)
• Total harmonic distortion is -120dB typical at (fIN = 2KHz, VREF = 5V)
• Operating temperature range from 0°C to 70°C, 16-lead plastic MSOP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party