LTC6228HS6#TRPBF

LTC®6228 is a 0.88nV/√Hz 730MHz, 500V/µs, single, very fast, low distortion rail-to-rail output op amp with the shutdown. The low input referred voltage noise of only 0.88nV/√Hz and low distortion performance of better than -100dB at 4VP-P even for signals as fast as 2MHz makes it ideal for applications that require high dynamic range and deal with high slew rate signals, such as driving A/D converters. Additional features include shutdown and the ability to enable/disable internal bias current cancellation to optimize noise performance. With an input range extending to the negative rail and an output range that encompasses the entire supply range, the operational amplifier can accommodate wide swinging signals, and single supply operation. Typical applications are optical electronics: fast trans-impedance amplifiers, driving high dynamic range A/D converters, active filters, video amplifiers, high speed differential to single-ended conversion, low voltage Hi-Fi amplification.

• Low distortion at high speeds:HD2/HD3 <lt/> −100dBc (Av = +1, 4VP-P, 2MHz, RL = 1Kohm)
• Input common mode range includes negative rail, output swings rail-to-rail
• Input offset voltage range from -95 to 95μV (TA = 25°C. VS = ±5V, VCM = 0V)
• Input offset voltage drift is 0.4μV/°C typical (TA = 25°C. VS = ±5V, VCM = 0V)
• Input bias current is -16μA typ (bias cancellation disabled, TA = 25°C. VS = ±5V, VCM = 0V)
• Input noise voltage spectral density is 0.88nV/√Hz typ (f = 1MHz, TA = 25°C. VS = ±5V, VCM = 0V)
• Common mode rejection ratio is 110dB typ (VCM = V– – 0.1 to V+ – 1.2V, TA = 25°C. VS = ±5V, VCM = 0V)
• Supply voltage range (V+ – V–) from 2.8 to 11.75V (TA = 25°C. VS = ±5V, VCM = 0V)
• Slew rate is 500V/μs typical (AV = +4, 8V output step, TA = 25°C. VS = ±5V, VCM = 0V)
• 6-lead TSOT-23 package, temperature rating range from -40°C to 125°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party