MAX14919AEVKIT#

MAX14919AEVKIT# is a MAX14919 evaluation kit (EV kit) which provides a proven design to evaluate the MAX14919 industrial-grade quad low-side switch with 140mohm (typ) RON and ±1kV/42ohm surge protection. The MAX14919 EV kit features an isolated power and signal interface to provide pin-level control of the four low side switches in the MAX14919. The EV kit also features reverse-current protection to prevent damage caused by miswiring faults at output and return terminals. The EV kit comes with the MAX14919AUP+ (20 TSSOPEP, 6.5mm x 6.4mm footprint) device installed.

• Robust operation with a wide range of input voltages and load conditions
• Surge protection with up to ±1kV IEC61000-4-5 at optional field supply input and output to ground
• LED indication of fault and reverse-current detect conditions
• Multiple fault-condition indications: reverse-current detection
• Undervoltage lockout on V5 output, short detection on RCLIM control input, thermal shutdown fault
• Includes a FET for output reverse-current protection
• Inrush current control to allow up to 2x the maximum load current
• Resistor-selectable options to set maximum allowable load current
• (+)1.8V to +5.5V wide logic-voltage range and +3V to +5.5V isolated supply input range
• Proven PCB layout and fully assembled and tested

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party