MAX17530AUBEVKIT#

MAX17530AUBEVKIT# is a MAX17530 5V evaluation kit (EV kit) (µMAX) which is a fully assembled and tested circuit board that demonstrates the performance of the 42V, 25mA ultra-small, high-efficiency, synchronous step-down DC-DC converter in a 10-pin µMAX package. The EV kit operates over a wide input voltage range of 6V to 42V and provides up to 25mA load current at 5V output. It draws only 26µA supply current under no-load conditions (EN/UVLO connected to VIN). The EV kit is programmed to switch at a frequency of 220kHz. The device is simple to use and easily configurable with minimal external components. It features cycle-by-cycle peak current-limit protection, undervoltage lockout and thermal shutdown. The EV kit comes installed with the MAX17530AUB+ in a 10-pin (3mm x 3mm) µMAX package.

• EN/UVLO for on/off control and programmable input undervoltage lockout
• Programmable switching frequency
• Internal or programmable soft-start
• Supports PFM or forced-PWM operating modes
• Open-drain (active low) RESET output
• Proven PCB layout
• Fully assembled and tested

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party