CYPM1311-48LDXI
ARM MCU, EZ-PD Family PMG1-S3 Series Microcontrollers, ARM Cortex-M0+, 32 bit, 48 MHz, 256 KB

| Manufacturer | INFINEON |
|---|---|
| Manufacturer Part No | CYPM1311-48LDXICopy |
| Manufacturer Standard Lead Time | 28 weeks |
| Order Code | 4153833 |
| Product Range | EZ-PD Family PMG1-S3 Series Microcontrollers |
| Also Known As | SP005674111 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Quantity | Price (inc GST) |
|---|---|
| 1+ | S$8.220 (S$8.9598) |
| 10+ | S$6.290 (S$6.8561) |
| 25+ | S$5.540 (S$6.0386) |
| 50+ | S$5.410 (S$5.8969) |
| 100+ | S$5.280 (S$5.7552) |
| 250+ | S$4.890 (S$5.3301) |
| 500+ | S$4.750 (S$5.1775) |
Product Information
| Manufacturer | INFINEON |
|---|---|
| Manufacturer Part No | CYPM1311-48LDXICopy |
| Manufacturer Standard Lead Time | 28 weeks |
| Order Code | 4153833 |
| Product Range | EZ-PD Family PMG1-S3 Series Microcontrollers |
| Also Known As | SP005674111 |
| Technical Datasheet | |
| Product Range | EZ-PD Family PMG1-S3 Series Microcontrollers |
| Device Core | ARM Cortex-M0+ |
| Data Bus Width | 32 bit |
| Operating Frequency Max | 48MHz |
| Program Memory Size | 256KB |
| No. of Pins | 48Pins |
| IC Case / Package | VQFN |
| No. of I/O's | 26I/O's |
| Interfaces | I2C, SPI, UART, USB |
| RAM Memory Size | 32KB |
| ADC Channels | 5Channels |
| ADC Resolution | 8Bit, 12Bit |
| Supply Voltage Min | 1.71V |
| Supply Voltage Max | 5.5V |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| IC Mounting | Surface Mount |
| MCU Family | EZ-PD |
| MCU Series | PMG1-S3 Series |
| Qualification | - |
| MSL | MSL 3 - 168 hours |
| SVHC | No SVHC (04-Feb-2026) |
Product Overview
CYPM1311-48LDXI is a Gen1 single port, high-efficiency power delivery microcontroller. It is targeted to devices, docks, and accessory applications. Its Cortex®-M0+ is a 32bit MCU that is optimized for low-power operation with extensive clock gating. The CPU sub-system also includes a 16-channel DMA/Datawire block and a serial wire debug (SWD) interface, which is a two-wire form of JTAG. The debug configuration used for PMG1-S3 has four break-point (address) comparators and two watch point (data) comparators. EZ-PD™ PMG1-S3 includes an integrated load switch controller with the following functions overvoltage and under voltage protection on VBUS, over current, short-circuit current and reverse current fault detection comparators for VBUS, VBUS discharge, and flexible gate drivers for VBUS NFETs. Potential application includes smart speakers, smart home appliances, VR/AR goggles, power tools, light electric vehicles.
- Type-C/PD blocks, up to two Type-C/PD blocks each with a baseband transceiver
- Integrated USB power-delivery (USB-PD) 3.1 support, supports 28V extended power range (EPR)
- Up to eight timer/counter pulse-width modulators (TCPWMs)
- Programmable GPIO pins, any GPIO pin can be CAPSENSE™, analog, or digital
- Integrated analog blocks, two 8-bit SAR ADCs, one 12-bit SAR ADC, two opamps
- Hardware crypto engine for secure FW boot and signed FW update
- USB full-speed device, charger detect block
- Two 8-bit ADC blocks, one 12-bit ADC block, two op-amps and two LP comparators
- 48-pin QFN package
- Industrial operating ambient temperature range from -40 to 85°C
Technical Specifications
| Product Range | EZ-PD Family PMG1-S3 Series Microcontrollers |
|---|---|
| Data Bus Width | 32 bit |
| Program Memory Size | 256KB |
| IC Case / Package | VQFN |
| Interfaces | I2C, SPI, UART, USB |
| ADC Channels | 5Channels |
| Supply Voltage Min | 1.71V |
| Operating Temperature Min | -40°C |
| IC Mounting | Surface Mount |
| MCU Series | PMG1-S3 Series |
| MSL | MSL 3 - 168 hours |
| Device Core | ARM Cortex-M0+ |
|---|---|
| Operating Frequency Max | 48MHz |
| No. of Pins | 48Pins |
| No. of I/O's | 26I/O's |
| RAM Memory Size | 32KB |
| ADC Resolution | 8Bit, 12Bit |
| Supply Voltage Max | 5.5V |
| Operating Temperature Max | 85°C |
| MCU Family | EZ-PD |
| Qualification | - |
| SVHC | No SVHC (04-Feb-2026) |
Technical Docs (1)
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Thailand Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85423990 |
| US ECCN: | 3A991.a.2 |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .000001 |
