6EDL04I065NTXUMA1

6EDL04I065NTXUMA1 is a 650V three-phase gate driver with over current protection (OCP), enable (EN), fault and integrated bootstrap diode (BSD). It is a full bridge driver to control power devices like IGBTs in 3-phase systems with a maximum blocking voltage of +650V. Based on the used SOI-technology, there is excellent ruggedness on transient voltages. No parasitic thyristor structures are present in the device. Hence, no parasitic latch-up may occur at all temperatures and voltage conditions. The device includes an under-voltage detection unit with a hysteresis characteristic and an overcurrent detection. The over-current level is adjusted by choosing the resistor value and the threshold level at pin ITRIP. Potential applications include home appliances, refrigeration compressors, air-conditioning, fans, pumps, motor drives, general-purpose inverters, power tools, and light electric vehicles.

• Qualified for industrial applications according to the relevant tests of JEDEC47/20/22
• Integrated ultra-fast, low RDS(ON) bootstrap diode
• Separate control circuits for all six drivers, detection of over current and under voltage supply
• Externally programmable delay for fault clear after over current detection
• Signal interlocking of every phase to prevent cross conduction
• 11.7V/9.8V typical UVLO thresholds
• Input bias current (ITRIP=high) is 45µA typ at VITRIP=3.3 V
• Turn-on propagation delay is 490ns typ at VLIN/HIN = 0 or 3.3V
• PG-DSO-28 package
• Ambient temperature range from -40 to 105°C