TLE9350BSJXTMA1

TLE9350BSJXTMA1 is a high-speed CAN FD transceiver. This high-speed CAN transceiver is used in HS CAN systems for automotive applications as well as for industrial applications. It is designed to fulfil the requirements of ISO 11898-2:2016 physical layer specification as well as SAE J1939 and SAE J2284. As an interface between the physical bus layer and the HS CAN protocol controller, the TLE9350BSJ is designed to protect the microcontroller against interferences generated inside the network. A very high ESD robustness and the optimized RF immunity allow the use in automotive applications without additional protection devices, such as suppressor diodes or common mode chokes. Based on the high symmetry of the CANH and CANL output signals, the TLE9350BSJ provides a very low level of electromagnetic emission (EME) within a wide frequency range. Applications include engine control units (ECU), electric power steering, transmission control units (TCUs), chassis control modules.

• Fully compliant to ISO 11898-2:2016 and SAE J2284-4/-5, AEC-Q100 qualified
• Loop delay symmetry for CAN FD data frames up to 5Mbit/s
• Very low electromagnetic emission (EME) allows the use without additional common mode choke
• Excellent ESD robustness, TxD timeout function, receive-only mode and power-save mode
• Very low CAN bus leakage current in power-down state, overtemperature protection
• Protected against automotive transients according to ISO 7637 and SAE J2962-2
• Transmitter supply voltage range from 4.5V to 5.5V
• Current consumption is 1.4mA typical at (VTxD = VCC; VNEN = 0V; VNRM = VCC; VCANH = VCANL = VCC/2)
• Input capacitance is 10pF maximum at (4.5V < VCC < 5.5V; RL = 60 ohm; -40°C < Tj < 150°C)
• Junction temperature range from -40°C to 150°C, PG-DSO-8 package