HO 10-P/SP33

HO 10-P/SP33 is a HO-P/SP33 series current transducer for the electronic measurement of current: DC, AC, pulsed, with galvanic separation between the primary and the secondary circuit. Standards include EN 50178: 1997, IEC 61010-1: 2010, IEC 61326-1: 2012, and UL 508: 2018. Applications include AC variable speed drives, static converters for DC motor drives, battery-supplied applications, uninterruptible power supplies (UPS), switched mode power supplies (SMPS), power supplies for welding applications, the solar inverter on the DC side of the inverter (MPPT), combiner box.

• Hall effect measuring principle, low power consumption
• Multirange current transducer through PCB pattern lay-out
• Galvanic separation between primary and secondary circuit
• Extremely low profile 12mm, fixed offset and sensitivity
• Overcurrent detection 2.63 × IP N (peak value), memory check
• Single power supply 3.3V
• Small size and space saving, only one design for wide primary current range
• High immunity to external interference, 8mm creepage/clearance, fast delay time
• Primary nominal RMS current is 10A typ at TA = 25°C, UC = + 3.3V, NP = 1 turn, RL = 10kohm
• Ambient operating temperature range from -40 to 105°C