TC4469CPD
MOSFET Driver Quad, Low Side Non-Inverting, 4.5V-18V supply, 1.2A peak out, 10 Ohm output, DIP-14
| Manufacturer | MICROCHIP |
|---|---|
| Manufacturer Part No | TC4469CPDCopy |
| Manufacturer Standard Lead Time | 7 weeks |
| Order Code | 1439739 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Quantity | Price (inc GST) |
|---|---|
| 1+ | S$7.550 (S$8.2295) |
| 25+ | S$6.320 (S$6.8888) |
| 100+ | S$5.720 (S$6.2348) |
Product Information
| Manufacturer | MICROCHIP |
|---|---|
| Manufacturer Part No | TC4469CPDCopy |
| Manufacturer Standard Lead Time | 7 weeks |
| Order Code | 1439739 |
| Technical Datasheet | |
| No. of Channels | 4Channels |
| Gate Driver Type | - |
| Driver Configuration | Low Side |
| Power Switch Type | MOSFET |
| No. of Pins | 14Pins |
| IC Case / Package | DIP |
| IC Mounting | Through Hole |
| Input Type | Inverting, Non-Inverting |
| Source Current | 1.2A |
| Sink Current | 1.2A |
| Supply Voltage Min | 4.5V |
| Supply Voltage Max | 18V |
| Operating Temperature Min | 0°C |
| Operating Temperature Max | 70°C |
| Input Delay | 40ns |
| Output Delay | 40ns |
| Product Range | - |
| Qualification | - |
| MSL | - |
| SVHC | No SVHC (04-Feb-2026) |
Product Overview
The TC4469CPD is a logic-input CMOS Quad Driver for driving all four MOSFETs in an H-bridge and CCD driver. Each driver has been equipped with a two-input logic gate for added flexibility. The TC446X driver can source up to 250mA into loads referenced to ground. Heavily loaded clock lines, coaxial cables and piezoelectric transducers can all be easily driven with the 446X series drivers. The TC446X series will not latch under any conditions within their power and voltage ratings. It is not subject to damage when up to 5V of noise spiking (either polarity) occurs on the ground line. It can accept up to half an amp of inductive kickback current (either polarity) into their outputs without damage or logic upset. In addition, all terminals are protected against ESD to at least 2000V. The TC4469 device is very robust and highly latch-up resistant. They can tolerate up to 5V of noise spiking on the ground line and can handle up to 0.5A of reverse current on the driver outputs.
- AND/INV input logic
- 2kV ESD protection on all pins
Applications
Motor Drive & Control, Signal Processing
Warnings
ESD sensitive device, take proper precaution while handling the device.
Technical Specifications
| No. of Channels | 4Channels |
|---|---|
| Driver Configuration | Low Side |
| No. of Pins | 14Pins |
| IC Mounting | Through Hole |
| Source Current | 1.2A |
| Supply Voltage Min | 4.5V |
| Operating Temperature Min | 0°C |
| Input Delay | 40ns |
| Product Range | - |
| MSL | - |
| Gate Driver Type | - |
|---|---|
| Power Switch Type | MOSFET |
| IC Case / Package | DIP |
| Input Type | Inverting, Non-Inverting |
| Sink Current | 1.2A |
| Supply Voltage Max | 18V |
| Operating Temperature Max | 70°C |
| Output Delay | 40ns |
| Qualification | - |
| SVHC | No SVHC (04-Feb-2026) |
Technical Docs (3)
Alternatives for TC4469CPD
1 Product Found
Associated Products
3 Products Found
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Australia Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .000907 |