MPM3683GMN-10-T

MPM3683GMN-10-T is an easy-to-use, fully integrated, DC/DC step-down power module, with 10A of continuous output current (IOUT). The MPM3683-10 integrates a DC/DC converter, power inductor, and passive components. It can deliver IOUT across a wide input voltage (VIN) supply range, with excellent load and line regulation. The constant-on-time (COT) control scheme provides fast transient response and eases loop stabilization. The operating switching frequency (fSW) can be easily set to 600KHz, 800KHz, or 1000KHz using the MODE configuration. This allows the MPM3683-10’s fSW to remain constant regardless of VIN and the output voltage (VOUT). It features a configurable softstart time (tSS) with a capacitor. An open-drain power good (PG) signal indicates whether VOUT is within the nominal voltage range. Typical applications are telecom and networking systems, base stations, industrial systems, servers and storage, FPGA and ASIC cards.

• 2.7 to 16V with external 3.3V bias, 4V to 16V with internal bias or external 3.3V bias input voltage
• Output voltage (VOUT) range from 0.6V to 5.5V
• Differential VOUT remote sense, stable with zero-ESR output capacitor (COUT)
• Selectable Pulse-Skip mode (PSM) or forced continuous conduction mode (FCCM)
• VOUT tracking, VOUT discharge, power good (PG) active clamped low during power failure
• Configurable soft-start time (tSS), pre-biased start-up
• Non-latch over-current, under-voltage lockout, Thermal shutdown, and over-voltage protection
• LGA-29 package
• Junction temperature (TJ) is 170°C

Notes

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.