MC9S08QG4CPAE

The MC9S08QG4CPAE is a 8-bit Microcontroller based on enhanced HCS08 CPU (10MHz bus) with CISC architecture operates at a maximum frequency of 20MHz. The device incorporates 4kB internal flash, 0.256kB internal RAM, 4-channel 10-bit A/D converter and 4 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps and one serial peripheral interface modules (SPI). Internal clock source (ICS) containing a frequency-locked-loop (FLL) controlled by internal or external reference, precision trimming of internal reference allowing 0.2% resolution and 2% deviation. Watchdog computer operating properly (COP) reset with option to run from dedicated 1kHz internal clock source.

• HC08 Instruction set with added BGND instruction
• Background debugging system
• Breakpoint capability to allow single breakpoint setting during in-circuit debugging
• Debug module containing two comparators and nine trigger modes
• Power-saving modes - Wait plus three stops
• Internal clock source module (ICS) - Containing a frequency-locked-loop (FLL)
• Low power oscillator module (XOSC)
• Low-voltage detection with reset or interrupt
• Illegal opcode detection with reset
• Illegal address detection with reset
• Flash block protect
• 8-bit Modulo timer module with 8-bit prescaler (MTIM)
• 8-pin Keyboard interrupt module (KBI)
• Software selectable pull-ups on ports when used as input
• Software selectable slew rate control and drive strength on ports when used as output
• Internal pull-up on RESET and IRQ pins

Applications

Industrial

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.