LT1213CN8#PBF

LT®1213 is a dual, single supply precision op-amp. This DC precision of the LT1213 eliminates trims in most systems while providing high frequency performance not usually found in single supply amplifiers. The device will operate on any supply greater than 2.5V and less than 36V total. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The minimum output drive is 30mA, ideal for driving low impedance loads. Applications include 2.5V Full-Scale 12bit systems: VOS ≤ 0.45LSB, 10V full-scale 16-Bit systems: VOS ≤ 1.8LSB, active filters, photodiode amplifiers, DAC current-to-voltage amplifiers, battery-powered systems.

• 8.5V/µs typical slew rate (AV = –2, VS = 5V, VCM = 0.5V, TA = 25°C)
• 26MHz typical gain-bandwidth product (f = 100KHz, VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C)
• 500ns typical settling time (0.01%, AV = 1, ∆VO = 2V)
• 100µV typical input offset voltage (VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C)
• 5nA typical input offset current (VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C)
• 100nA typical input bias current (VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C)
• Single supply operation, input voltage range includes ground
• Output swings to ground while sinking current
• 105dB typical common mode rejection ratio (VCM = 0V to 3.5V)
• 14 lead plastic DIP package, operating temperature range from -40°C to 85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party